Reshade v3.4.1 / SweetFX 2.0

//ES

Noches más oscuras con mi preset v1.9.11 (Opcional)

Para Reshade v3.4.1

- Abrir el menú con (Shift + Delete).
- Cambiar (Usage Mode) a modo configuración.
- En la pestaña (Home) desactivar el efecto (Tonemap).

Para mayor oscuridad, dejar activado el efecto Tonemap y ajustar el valor Gamma a 1.100 o superior.


Importante: En horas del día, activar nuevamente el efecto.

*****

Para SweetFX v2.0

- Editar el archivo (SweetFX_settings.txt) con Notepad++.
- Cambiar el valor de 1 a 0 para desactivar el efecto (Tonemap).
- Se puede editar con el juego activado en pantalla completa.
- Guardar los cambios. 

Ejemplo: #define USE_TONEMAP       	0 //[0 or 1]

Para mayor oscuridad, dejar activado el efecto Tonemap y ajustar el valor Gamma a 1.100 o superior.


Importante: En horas del día, activar nuevamente el efecto.

*****

Solo es necesario desactivar el efecto si el entorno es muy brillante por las noches. También afecta si usas Mod Gráficos con mucha luz ambiente o brillo. Recomiendo dejar los efectos de mi Preset por defecto (Todos activados) para ATS/ETS2 y para los otros juegos dejar desactivado SMAA o usar el Preset con SMAA OFF.

Nota: Está guía no la recomiendo para mi preset. Es una solicitud de un usuario. Afecta la claridad del entorno.

 
//EN

Darkest nights with my preset v1.9.11 (Optional)

For Reshade v3.4.1

- Open the menu with (Shift + Delete).
- Change (Usage Mode) to configuration mode.
- In the tab (Home) deactivate the effect (Tonemap).

For greater darkness, leave the Tonemap effect activated and adjust the Gamma value to 1,100 or higher.


Important: At daytime, activate the effect again.

*****

For SweetFX v2.0

- Edit the file (SweetFX_settings.txt) with Notepad ++.
- Change the value from 1 to 0 to deactivate the effect (Tonemap).
- It can be edited with the game activated in full screen.
- Save the changes.

Example: #define USE_TONEMAP       	0 //[0 or 1]

For greater darkness, leave the Tonemap effect activated and adjust the Gamma value to 1,100 or higher.


Important: At daytime, activate the effect again.

*****

It is only necessary to deactivate the effect if the environment is very bright at night. It also affects if you use Mod Graphics with a lot of ambient light or brightness. I recommend leaving the effects of my Preset by default (All activated) for ATS/ETS2 and for the other games leave SMAA off or use the Preset with SMAA OFF.

Note: This guide is not recommended for my preset. It is a request from a user. It affects the clarity of the environment.

